NOWlab and partners create 3D Printing Illuminating Architecture – The Smart Concrete Wall

Google+ Pinterest LinkedIn Tumblr +

NOWlab is the innovation department of large-scale 3D printer manufacturer BigRep, has completed a smart architecture project with Immensa Technology Labs, which is dedicated to the advancement of 3D printing throughout the United Arab Emirates (UAE). The so-termed Smart Concrete Wall takes on the shape of a hexagonal grid inspired by Ancient Arabic tiling. It has an adaptive surface, activated by touch, and it couldn’t be created without the use of 3D printing.

How to create?

FIRST STEP –  Molds are made on the BigRep ONE 3D printer, an FFF machine with a build area of 1005 mm x 1005 mm x 1005 mm (XYZ). When stacked together in three, these molds combine to create a shape which is then filled with concrete and left to set.

SECOND STEP – 3D printed lights and cable channels for electronics are added to the concrete framework. Attached to a capacity sensor in another of the hexagonal compartments, these lights are activated by touch.

The NOWlab and Immensa Technology Labs' Smart Concrete Wall. Photo via NOWlab/Immensa
The NOWlab and Immensa Technology Labs’ Smart Concrete Wall. The lights are activated by touch. Photo: NOWlab

 

 

Technology with a patent

UAE construction firm, Consolidated Contractors Company, was engaged by Immensa to perform the casting. The formwork concrete casting technology used in the project is actually a patented process from BigRep, the IP of which was filed in 2016 and subsequently granted in April 2018. Immensa Labs’ has its own, separate, patented-pending construction method that aims to use 3D printed molds to create buildings in Dubai. (Read More about 3D Printing buildings).

3D printed mold/formwork removal from the Smart Concrete Wall. Photo via Designboom/BigRep
BigRep’s patented 3D printed formwork removal from the Smart Concrete Wall. Photo: Designboom/BigRep

Teaching old architecture new tricks

With the Smart Concrete Wall, NOWlab is reviving an old, and typically expensive construction technique yielding innovative forms that would be otherwise impossible to make with traditionally made molds.

A similar approach was recently taken by researchers at ETH Zurich that used 3D printed sand cast to make a metal facade. At New York architectural design studio EDG, practitioners are also examining 3D printed casting’s ability to renovate dilapidated buildings.

Jörg Petri is the co-founder of NOWlab and Head of Research & Applications at BigRep and recently has been hosting webinars on the potential of 3D printed formwork for construction, so there may still be more to come from this innovative project.

Find more 3D Printer Manufacturers in our Business Directory.

Sources & More information

Related article categories:
Industry

Article and featured image:

Beau Jackson 3D Printing Industry 3DP Applications Jun 28, 2018, BigRep creates illuminating architecture with Immensa and 3D Printing https://3dprintingindustry.com/news/bigrep-creates-illuminating-architecture-with-immensa-and-3d-printing-135317/ visited on Jun 30, 2018;

additivenews.com

additive manufacturing newsletter

 

Share.
Additive Manufacturing

FREE
VIEW